Irrigation Design & Installation
Water what needs it.
Nothing more.
North Idaho summers are short and dry. An irrigation system that runs on a fixed timer regardless of rainfall isn't conservation — it's waste. Every system LP designs separates your lawn, native beds, and garden areas into matched hydrozones, so every zone only runs as long as it needs to.
Idaho winters are hard on buried lines. We install to local depth requirements, pressure-test before backfill, and personally winterize every system we put in — so you're never calling a stranger in September.
Full-service irrigation for every property need.
Backflow Testing & Repair
Certified annual testing, repairs, and code-compliant installation of RPZ and PVB assemblies to protect your water supply.
Custom System Design
Tailored in-ground and drip irrigation layouts for new builds, renovations, and complex landscapes. Engineered for Idaho climate.
Drip Irrigation
Water-saving emitter lines for beds, gardens, and native plantings. Delivers moisture directly to the root zone, minimizing waste.
Head Repair & Valve Maintenance
Pop-up head replacement, valve troubleshooting, and zone diagnostics to keep every part of your system running right.
Leak Detection & Pipe Repair
Pinpointing and fixing underground leaks, broken laterals, and mainline issues before they become costly water loss.
Pressure Regulating Valve
Install and service of PRVs to ensure optimal pressure, prevent misting, and extend the life of your irrigation system.
Pump Station Maintenance
Annual and emergency service for irrigation pumps, including priming, winterization, and troubleshooting.
Rain Sensor & Weather Station
Smart sensors and weather stations that pause watering during rain or adjust for local conditions, maximizing efficiency.
Smart Controller Integration
WiFi-enabled controllers that auto-adjust for weather, save water, and provide remote scheduling from your phone.
Spring Startups & Calibration
System pressurization, head adjustment, and controller programming to ensure a perfect start to every season.
System Retrofitting
Upgrades and expansions for older or undersized systems, including zone additions and efficiency improvements.
Winterization & Blowouts
Full compressed-air blowouts and controller shutdowns to protect your system from Idaho's deep freezes.
The right system for every part of your property.
In-Ground Sprinkler Systems
Fully buried pop-up rotors and spray heads zoned by turf type and sun exposure — invisible when off, optimized when on.
Drip Irrigation
Precision emitter lines routed directly to plant root zones. Ideal for native beds, gardens, and water-restricted properties.
Smart Controller Upgrades
WiFi controllers that pull local weather data and auto-adjust run times. Reduce water use by 30–50% without touching a dial.
Backflow Prevention
Tested and certified RPZ or PVB assemblies that protect your home's drinking water from contamination. Required by code in most Idaho municipalities.
From site walk to first run.
Site Evaluation
We walk your property to map soil type, grade, sun exposure, plant types, and static water pressure before drawing a single zone.
Zone Design
Turf, shrubs, drip beds, and specialty areas are separated into matched hydrozones so nothing is over- or under-watered.
Installation
Trenched to proper depth below Idaho's frost line. Heads set flush to grade. All joints solvent-welded and pressure-tested before backfill.
Programming & Walkthrough
Controller programmed for your specific turf and plants. We walk you through every zone and leave you with a laminated zone map.
We're there at the start and end of every season.
Spring Startup
Late April – May- Pressurize system and inspect all zones
- Adjust heads for seasonal coverage changes
- Update controller program for spring run times
- Replace any winter-damaged components
Fall Winterization
September – October- Full compressed-air blow-out of all lateral lines
- Backflow assembly winterization
- Controller shutdown and battery backup
- Documented zone map left with homeowner
Seasonal service plans are available for LP-installed systems and existing third-party systems. Call to schedule your spot — fall blow-out bookings fill fast in September.
Frequently Asked Questions
Related Services
Free Estimate